Silicone and sealant close the joint between two surfaces against water and air. Over time it hardens, cracks, separates at the edges and grows mold in damp areas. A small gap means water seeping under the countertop, into the wall or to the floor below. In Alanya, we completely remove old silicone and apply new silicone at bathroom, kitchen, window, facade and floor joints.
What does our sealant and silicone service include?
Applying new silicone over old silicone is not a lasting solution; the mold stays underneath and returns quickly. That is why we start the job with removal:
- Complete removal of the old silicone
- Cleaning of mold and residue
- Drying and priming the surface
- Choosing the right product for the location (anti-mold, exterior facade, suitable for natural stone)
- Smooth application with an even thickness
- Filling of expansion joints
- Neutral silicone that does not stain natural stone
- Information on curing time
Where we renew sealant and silicone
We work on all joints that come into contact with water:
- Around bathtubs and shower trays
- Around sinks and behind countertops
- Kitchen countertop joints
- Around windows and doors
- Exterior facade joints
- Floor expansion joints
- Skirting board joints
- Pool surround joints
How do we work?
- Inspection: We determine the right product based on the location and movement of the joint.
- Removal: We remove the old silicone without leaving any residue.
- Cleaning: We clean off mold and grease, and let the surface dry.
- Taping: We tape both edges for a clean, straight line.
- Application: We apply the silicone, smooth it out, and remove the tape.
- Handover: We tell you the curing time and what to watch out for.
You can't apply new silicone over old silicone
This is the most common mistake. Silicone applied over the old layer won't hold, and the mold underneath soon resurfaces.
- Remove all of the old silicone completely
- Dry the surface; silicone won't stick to a damp area
- Use mold-resistant silicone in the bathroom and neutral-cure silicone on marble
- Choose a sun-resistant sealant for exterior facades
In Alanya, humidity and sun age silicone quickly
- Bathrooms: In humid air, silicone molds faster.
- Vacation homes left closed up: Mold spreads quickly in a bathroom without ventilation.
- South-facing sides: Strong sun dries out the sealant and cracks it.
- Seaside: Wind-driven rain gets in through open joints.
If you want to renovate the whole bathroom, we can do it together with bathtub polishing .
State-of-the-art devices and equipment
In sealant and silicone work in Alanya, whether on bathroom, kitchen, countertop or natural stone joints, the first thing that determines the quality of the job is the right equipment. We choose the device and material according to the type of surface and where the work is done; we do not use products that are harmful to human or environmental health.
- Tools that remove old silicone without damaging the surface
- Mold and residue cleaning products
- Mold-resistant, color-matched silicones and sealants
- Profile tools for a neat, even bead
When working with water, we vacuum up the dirty water at the same time; areas that are not being worked on can continue to be used while the job is in progress. When we finish, we also explain how to clean and care for the surface day to day.
World-class quality
No matter how good the machinery and materials are, it is the craftsman's hand that produces a clean, lasting finish. If new silicone is applied without fully removing the old, mold returns quickly, so we always clean the surface thoroughly first.
For years, our team has been carrying out sealant and silicone work in hotels, residential complexes, villas, and commercial properties across all districts of Alanya, including the city center, Mahmutlar, Kestel, Oba, Tosmur, Cikcilli, Avsallar, Türkler, Konaklı, and Okurcalar. On every job, we determine the steps according to the condition of the surface and bring the same care to every stage.
Pricing and quotes
Sealant and silicone renewal is priced per meter. We give you a firm price after seeing the job on site; the inspection is free. The price depends on:
- Total length
- Condition of the old material to be removed
- Type of product to be used
- Whether work at height (facade) is involved
For a preliminary estimate, simply send a few photos and approximate measurements via WhatsApp.
Customer satisfaction and warranty
At Alanya Mermer Silim, we carry out mastic and silicone work with our own team and our own machines. Before we start, we tell you clearly what will be done, how long it will take, and what it will cost.
- The price quoted at the survey is the price charged when the job is done
- We protect your belongings and the surrounding surfaces while we work
- Before handing over the job, we check the result together with you
- If you notice a problem after delivery, we will come back
- A straight, evenly thick, watertight sealant joint is a condition of our delivery.
Frequently asked questions
01How long does silicone take to cure?
02Will the mold come back?
03Can any silicone be used on marble?
04Will you come out for a small job?
Contact us for detailed information
We offer on-site inspections for mastic and silicone work in Alanya city center, Mahmutlar, Oba, Kestel, Konaklı, Avsallar and all surrounding towns. Service Request FormYou can fill out the or reach us via the phone and WhatsApp line on our contact page.
